close
Choose Your Site
Global
Social Media
Views: 0 Author: Site Editor Publish Time: 2025-06-03 Origin: Site
Installing Koris® solid surface countertops is a great way to enhance the beauty and functionality of your kitchen or bathroom. These countertops are durable, non-porous, and easy to maintain, making them a popular choice for modern homes. With the right tools and techniques, you can install them yourself or ensure a professional finish. Below is a step-by-step guide along with an embedded installation video for visual reference.
Before starting, gather the following:
Koris® solid surface countertops
Measuring tape & level
Jigsaw or circular saw with a fine-tooth blade
Sandpaper (100-grit and 2000-grit)
Adhesive (recommended by Koris®)
Clamps
Router (for edge finishing, if needed)
Safety gear (gloves, goggles, mask)
Accurate measurements are crucial. Measure the cabinet base and mark the countertop dimensions, accounting for overhangs (typically 1-1.5 inches).
Use a fine-tooth blade to cut the Koris® countertop to size. Support the material properly to avoid chipping. Sand the edges smoothly.
Place the cut countertop on the cabinets to check alignment. Make adjustments if necessary.
Apply a high-quality adhesive (recommended by Koris®) to the cabinet tops. Carefully lower the countertop into place and press firmly.
Use clamps to hold the countertop in place while the adhesive cures (follow manufacturer’s drying time).
Apply silicone sealant along the edges where the countertop meets the wall to prevent moisture penetration.
Sand any rough edges and polish the surface for a seamless look.
For a detailed visual guide, check out this step-by-step installation video:
Installing Koris® solid surface countertops requires precision but is manageable with the right preparation. Always follow manufacturer guidelines for adhesives and finishing. If unsure, consult a professional for best results.
Would you like additional tips on maintenance or design options? Let us know in the comments!
